Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A
CD indicator
B
Memory card indicator
C
USB device indicator
D
Scan play
E
Random play
F
CD operation
G
MP3 operation
5. INSTALLATION
This amplifier is built for 19" racks (483 mm). This rack use should be a double-door rack where front panel
and rear panel can be opened. The rack should be provided with a cooling fan. When mounting the amplifier
into the rack, please make sure that there is enough space around the device so that the heated air can be
passed on. Steady overheating will damage your device.
You can fix the amplifier with four screws M6 in the rack. If several devices are to be installed, make sure
that you leave 1 unit space between the devices.
Be careful when mounting the amplifier into the rack. Put the heaviest devices into the lower part of the rack.
Be aware that fastening the amplifier with four screws on the front panel is not enough. In order to ensure
safety, additional fastening by using ground and side bars is necessary.
If racks are to be transported or used for mobile use, additionally fasten the devices by connecting the rear
brackets with the side or ground bars of the rack. Thus, the amplifier cannot be pushed backwards. The front
panel alone is not designed to absorb acceleration forces occuring during transportation.
H
Equalizer setting
I
Loud function
J
Stereo reception
K
Repeat function
L
Text line
M
Memory preset
29/36
00050722.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
