Omnitronic EIO3-50III Bedienungsanleitung Seite 26

10 Fuse holders AC and DC
Only replace the fuse when the device is disconnected
from mains. Only use fuses of the same rating and
power. The correct value is specified on the rear panel.
11
Emergency power switch
Switches the emergency power battery on and off in case
of a mains failure.
12 Power cable
13 Voltage selector switch 115/230 V
Make sure this switch is properly set at any time.
14
Screw terminals for a 12 V emergency power battery
15 Common ground connection for all speakers
16 Screw terminal for 4
17 Screw terminals for PA speakers
26/36
speakers
00050722.DOC, Version 1.0