Maintenance; General Service - UNI-T MIE0146 Bedienungsanleitung

E. Diodes Test
Remarks:
● Overload Protection: 600Vp
● Open circuit voltage approximate 1.48V.
F. AC current: auto ranging
Remarks:
● Overload protection: 600A rms
● Frequency response: 50Hz~60Hz
● Displays effective value of sine wave (mean value response).
● To adjust reading in accordance with effective value.

MAINTENANCE

This section provides basic maintenance information including battery replacement
instruction.
Warning
Do not attempt to repair or service your Meter unless you are qualified to do so and
have the relevant calibration, performance test, and service information.
To avoid electrical shock or damage to the meter, do not get water inside the case.
EN
A. General Service
● Periodically wipe the case with a damp cloth and mild detergent. Do not use abra-
sives or solvents.
● To clean the terminals with cotton bar with detergent, as dirt or moisture in the termi-
nals can affect readings.
● Turn the Meter power off when it is not in use.
● Take out the battery when it is not using for a long time.
● Do not use or store the Meter in a place of humidity, high temperature, explosive,
inflammable and strong magnetic field.
32
Owner's manual
Range Resolution
1mV
Range
20A
200A
600A
Accuracy
Display approximate
forward voltage drop.
Resolution Accuracy
0.01A ±(2.0%+5)
0.1A ±(1.5%+5)
1A ±(2.0%+8)