Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Owner's manual
MEASUREMENT OPERATION
A. DC voltage measurement (see figure 3)
Warning
To avoid harms to you or damages to the Meter from electric shock, do not attempt to
measure voltages higher than 600V AC/DC.
To measure DC voltage, connect the Meter as follows:
1. Insert the red test lead into the
terminal and the black test lead into the
COM terminal.
2. Set the rotary switch to
.
3. Connect the test leads across with the object being measured.
The measured value shows on the display.
EN
(fig. 3)
Note:
When DC voltage measurement has been completed, disconnect the connection
between the testing leads and the circuit under test and remove testing leads from the
input terminals.
24
Werbung
Inhaltsverzeichnis
