Operating The Monitor; Walkie-Talkie Function - switel BCF 850 Bedienungsanleitung

6 Operating the Monitor

Check the camera and monitor units are working properly each time before the equipment is put
into operation.
Switching the monitor on
Press and hold On/Off / Back button. The "Power on" LED lights up.
The icon bar appears in the display. The monitor is now in Monitoring mode and is operational.
Switching the monitor off
Press and hold the On/Off / Back button until the "Power off" LED goes out.
Selecting the camera
Up to 4 cameras can be registered on the monitor.
Press the Scroll up button or Scroll down button, several times if necessary, to switch between the various
image transmissions from the registered cameras.
After the image transmissions of all the cameras registered on the monitor have appeared in the display in
succession, the display is divided into quarters and the transmissions from all the registered cameras can
be viewed in the display in a scaled-down size.
If all the camera transmissions are displayed in miniaturised form on the screen, there is no sound
transmission to the monitor.
Adjusting the volume on the monitor
Use the Scroll left button or Scroll right button to adjust the volume with which the sounds detected in the
room in which the camera is mounted are played. There are 5 volume levels available. The volume can
also be switched off.
S
Press the Scroll right button to increase the volume.
S
Press the Scroll left button to lower the volume or switch it off.
The volume level currently selected is indicated in the display while altering the volume. If the volume is
switched off, no bar appears in the display.

Walkie-talkie function

You can speak into the monitor unit and be heard from the camera unit, e.g. to calm the baby/child or
speak to a person in the room being monitored.
1. Press the Speak/Delete button on the monitor.
2. Speak into the microphone on the monitor.
3. Press the Speak/Delete button on the monitor again to end the walkie-talkie function and return to
monitoring the room.
Zooming the image section in and out
In order to be able to see more details, you can enlarge (zoom) a section of the image in the display. One
zoom level is available.
1. Press the Menu/OK button on the monitor to open the menu.
2. Use the Scroll right button or Scroll left button to select the
displays a magnifying glass with plus sign.
3. Press the Menu/OK button to confirm your selection.
4. Use the Scroll right button or Scroll left button to select the image section to be zoomed.
5. Press the Menu/OK button to confirm your selection.
6. To zoom out, press the Menu/OK button on the monitor to open the menu.
7. Use the Scroll right button or Scroll left button to select the
section is enlarged, the icon displays a magnifying glass with minus sign.
8. Press the Menu/OK button to confirm your selection.
42
43
Operating the Monitor
Zoom In/Out menu option. The icon
Zoom In/Out menu option. If an image
71