Intended Use - VOLTCRAFT LCR-400 Bedienungsanleitung

4. INTENdEd uSE

• Measuring and displaying the electrical values of coils (L), capacitors (C), and resistors (R)
• Measuring inductivities of up to 2000 mH
• Capacity measurement up to 200 µF
• Measuring resistors (AC-R of up to 20 MOhm / DC-R of up to 200 MOhm)
• Displaying the quality factor "Q"
• Displaying the electrical loss factor "D"
• Displaying the phase angle "θ" (0.00° to ±90.0°)
The measurement functions and measuring ranges are selected using the pushbuttons.
Automatic measuring range selection is active in all measuring areas.
Components must only be connected to the measuring device when powered down and
discharged.
No voltages must be applied to the measuring device.
Measurement under unfavourable ambient conditions is not permitted.
Unfavourable ambient conditions are: Dust and flammable gases, fumes or solvents, thunder-
storms or thunderstorm conditions like strong electrostatic fields, etc.
For safety reasons, only use measuring accessories which are adjusted to the specifications of
the measuring device when measuring.
Any use other than that described above will lead to damage to the product and involves ad-
ditional risks such as, for example, short circuit, fire, electric shock, etc.
No part of this product must be modified or converted!
Read the operating instructions carefully and keep them for later reference.
Always observe the safety information!
27