General.description; Scope Of Delivery; Overview; Functional Description - FLORABEST FLV 1300 A2 Originalbetriebsanleitung

General description

Scope of delivery

Carefully unpack the implement and check
that all the subsequently listed parts are
complete:
• Implement case with verticuttor cylinder
and impact protector
• Aerating cylinder
• Upper handle bar complete with start-
ing lever, power plug, unlocking button
and firmly mounted power cable
• Lower bar
• 2 centre bars
• Collection bag
• Cable strain relief
• 2 cable clamps
• Mounting accessories:
- 2 Philips screws, 4 screws and 4
wing nuts to fasten the bar
- Spanner to change the cylinders
• Instruction Manual
Ensure during assembly that the
power cable is not squeezed and
that it has sufficient play.

Overview

. The.most.important.
functional.parts.are.il-
lustrated.on.the.cover.
page.
A 1 Unlocking button
2 Power cable (10 m)
3 Starting lever
4 Upper handle bar
5a+b 4 screws and 4 wing nuts to se-
cure the bar
6 Collection bag
7 Handle on the Collection bag
8 Lower bar
9 Impact protector
10 Implement case
11 2 wheels
12 2 rear wheels
13 Setting button
14a+b 2 cable clamps
15 2 centre bars
16 Electric cable
17 Spanner
18 Tool holder
19a Cable strain relief
19b Tension adjuster bracket
20 Aerator cylinder with sprung
tines
21 Verticutor cylinder with knives
C
22 Collection bag rods
23 Pins
24 Plastic straps
E
25 Fastening screw
26 Bearing cover
F
27 Shaft

Functional description

The verticuttor and lawn aerator has two
easily exchangeable work cylinders:
An aerator cylinder made of hard plastic
with vertically rotating sprung tines, and a
verticutor cylinder with vertically mounted
high-grade steel knives.
The implement features a high-quality plas-
tic case with collection bag and a handle
bar with a folding function. Please refer to
the subsequent descriptions for the actual
functions of the individual control elements.
Technical data
Electric.Scarifier./
Aerator. ...................... FLV.1300.A2
Motor input .............................. 1300 W
Rated voltage ...................230V~, 50 Hz
Protection Class ...............................
Degree of protection .........................IPX4
Rotating speed of the tool (n
......................................3600 min
Cylinder width ...........................360 mm
Readjustment range for wear ...........9 mm
Weight (without collection bag) ... 11.4 kg
GB
II
)
o
(r.p.m)
-1
5