Entering The Material Temperature - Wohler HBF 420 Bedienungsanleitung

4.2 Entering the material
temperature
•
The user can enter the temperature of the
measurement material into the meter. As the
measured value depends on the material tem-
perature, the meter will perform an automatic
temperature compensation on the basis of the
temperature entered by the user.
NOTE!
Temperatures from -60 °C to +60 °C can be en-
tered.
•
To enter the temperature value into the meter
follow the steps below (see short manual at
the end of this manual):
•
Measure the material temperature, e.g. with
the Wöhler IR Temp 210 (see accessories).
•
Switch on the Wöhler HBF 420 and press the
Set key (1).
•
The temperature value, that was entered last,
will appear on screen.
•
Increase or reduce the value with the up and
down keys (2 and 4).
•
Press the Set key (1) to confirm. The menu to
select the measuring mode appears on
screen.
•
(If you do not want to change the measuring
mode, press the ON/OFF key (3) instead of
confirming).
Device
EN
41