Leckey Horizon Bedienungsanleitung Seite 10

8.7 Positioning the Sandals
Each sandal is attached to the
individual footplate with a single fixing
bolt. The footplate is covered with a rubber
pad to ensure the sandals do not slide when
secured. If you wish to rotate the sandal
laterally, simply loosen the knob, place in
the required position and then re-tighten
the knob securely (a).
Use caution when lifting and
lowering the footplate as fingers
could become trapped.
A
8.8 Flexible Lateral
Support Adjustment
The flexible lateral supports can be adjusted
in height and width. To adjust the width,
loosen the knob (b) on the back of the chest
pad. Then adjust the lateral support to
the required position and finally re-tighten
the knob. To change the height, loosen as
before, slide the bracket out fully and insert
in an alternative slot (a), replace the knob
and tighten securely. As the lateral brackets
are staggered in height, additional height
range can be achieved by swapping the
lateral from the left to the right side. The
flexible lateral supports are secured around
the user by tightening the safety strap (c) into
position. Fasten the safety strap immediately.
Check the laterals are secure before
placing the user in the product. As if
they are loose the user may be at risk of
slipping into a position they cannot not
recover from and could restrict
their breathing.
A
B
C