Product Description; Mounting The Unit - Klarstein 10027946 Bedienungsanleitung

• Keep materials such as hair, net curtains, tablecloths & clothes away from the openings of the to-
wer fan, as material may be sucked into the appliance causing injury, damage to property or the
appliance.
• The appliance has hot and arcing or sparking parts inside. It must NOT be used in potentially dan-
gerous locations such as flammable, explosive, chemical-laden, corrosive, salty or wet atmosphe-
res. This appliance is intended for general indoor domestic use ONLY.
• This appliance is not intended for use in wet or damp locations. Never locate it where it may fall
into a bathtub or other water container.
• Do not use the tower fan outdoors. Do not use close to windows or in direct sunlight.
• Always place the appliance on flat, stable surfaces before use. Always place the appliance verti-
cally on its base.
• To avoid danger of electric shock, unplug from outlet when not in use and before cleaning. If the
supply cord is damaged, it must be replaced by the manufacturer, its Service Agent or similarly
qualified persons in order to avoid a hazard. In order to avoid overheating, do not cover the ap-
pliance.
1. Carefully remove the appliance from the plastic bag and the carton, and unwind the cord.
2. Assemble the base of the fan onto the bottom of the body:
A
Remove the 3 thumb
screws on the bottom
of the main body.
7
Product Desciption

Mounting the Unit

B
Place the power cord
between the two
halves of the base and
bring them together
(plug end should be
on the side of the
base feet).
C
Push the base into
the bottom of the fan
body and align the 3
holes. Attach using
the 3 thumb screws.
D
Fix the cord to the un-
derside of the base in
the 2 small clips and
through the slot that
exits close to the rear
of the appliance.