Electrical Connection - Fagor 2LF 013 IX Installationsanleitung Und Bedienungsanleitung

2

ELECTRICAL CONNECTION

Please refer to the specification label on the top edge of the door before making the electrical
connections. Make sure that the power voltage connected to the plug socket is as shown
on the label.
It is very important for
the dishwasher to be
connected to an earthed plug
socket. The electrical
installation, plug, socket,
fuses or circuit breaker and
meter must be capable of the
maximum power shown on
the specifications label. If the
power cable is damaged, it
must be replaced exclusively
by the manufacturers,
aftersales service (TAS) or
authorised personnel. If the
appliance is to be
recessmounted and
integrated, the plug must be
accessible after installation.
3
LEVELLING AND POSITIONING
LEVELLING
It is important for the dishwasher to rest firmly on the floor, in a perfectly upright position. It should
then be levelled to rectify the effect of any unevenness of the floor.
Use a spirit level.
POSITIONING
If the appliance is to be positioned under a worktop, top can be removed or left in position.
a If you wish to remove
the cover, you may do
this by detaching the
rear part of the same.
b Remove the rear
counterweight and pull
out the insulating
blanket, if the model
has one.
I M P O R T A N T
The specifications label is on the top edge of the interior
of the door. This label must never be removed, since it
provides information about the exact model of the
dishwasher, required power supply, serial number and
warranty.
This appliance is not designed for use by physically, sensorially
or mentally handicapped people (including children), or people
without experience or knowledge of the appliance, unless
they are supervised or instructed in its use by a person
responsible for their safety. Children must be supervised to
ensure they do not play with the appliance.
a
Model Serial number
b