Fagor 2LF 013 IX Installationsanleitung Und Bedienungsanleitung Seite 67

Adjusting the racks
The racks can be
adjusted in accord with
the load.
The top rack can be
placed at two different
heights for washing
different-sized plates.
In the upper position, the
top rack holds standard-
size plates of up to 19 cm
and the bottom rack holds
plates of up to 31 cm. In
the lower position, the top
rack holds plates of up to
24 cm and the bottom
rack holds plates of up to
26 cm.
a Top rack model A:
This can be adjusted
without being
removed from its rails,
even when loaded
with utensils. To raise
or lower its position,
pull the rack upwards
by the side handles.
Check that both sides
are at the same
height. If not, make
them level.
Top rack model B:
b
Remove the stop that
prevents the rack wheels
from coming out of the
rails. Pull the rack
towards you and take it
out. Position the basket
at the height required.
Replace the stop in its
original position making
sure it fits right in
longitudinally on the rail;
you will hear a click when
it locks in place.
19
cm.
31
cm
.
a
b
English
24
cm.
26
cm.
b
67