Cleaning Before Use - Fagor 2LF 013 IX Installationsanleitung Und Bedienungsanleitung

5
CHOOSING A LANGUAGE
Some display model
dishwashers allow you to customise
the menus on the display in your
preferred language. To do this,
proceed as follows:
a To activate the
LANGUAGE mode:
Press and hold
down the Top
Load/Bottom Load
button for at least
three seconds.
b
To change or select a
language: Press the
Top Load/Bottom
Load button. A new
language will appear.
6

CLEANING BEFORE USE

Once the dishwasher has been installed correctly, it should be first used on prewash programme:
a Press and hold down the On/Off
(see pages 69-70) button for two
seconds (until you hear the
confirmation beep). The pilot light,
display or screen will light up on the
front panel of the dishwasher,
depending on the model.
b Select programme 1 (prewash), with
no dishes or detergent in the
dishwasher.
c
Press and hold down the Start button
until you hear the confirmation beep.
b
Dial model
This is to check the installation, the connections and the drain outlet, as well as to completely
wash the interior before running a wash programme.
a
c To validate the
LANGUAGE:
Press the Start
button.
The language has now
been selected.
a
b
Button model
English
b
c
a
c
59