Electrolux EOC69611 Benutzerinformation Seite 34

34 electrolux
Do not open the door during the heat-
ing up time. If you open the door, you
cancel the Pyrolytic .
Cleaning reminder
The reminder function tells the user when
pyrolytic cleaning is necessary.
The reminder function activates when you
set the appliance to the factory settings.
Activate and deactivate the reminder func-
tion in the options menu with CLEANING
MENU. .
Cleaning assistant
Cleaning Assistant tells you the steps to op-
erate Pyrolytic , before you start the Pyrolyt-
ic
Activate and deactivate the Cleaning Assis-
tant in the options menu with CLEANING
MENU. .
Shelf support rails
You can remove the shelf support rails to
clean the side walls.
Removing the shelf support rails
1. Pull the front of the shelf runners away
from the side wall.
2. Pull the shelf runners from the back of
the side wall to remove the shelf sup-
port rails.
1
2
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
Important! Make sure that the retaining
pins on the telescopic shelf runners point to
the front.
Oven lamp
Warning! Be careful! There is the risk
of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or
switch off the circuit breaker.
Put a cloth on the bottom of the oven
for protection of the oven light and
glass cover.
1. Turn the glass cover anti-clockwise to
remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with appli-
cable 300°C heat-resistant oven light
bulb.
Use the same oven lamp type.
4. Install the glass cover.
Cleaning the door glass panels
1. Clean the door glass panels with warm
water and soap.
2. Carefully dry the door glass panels.
Cleaning the oven door
The oven door has four panels of glass.
You can remove the internal panels of glass
to clean them.
Removing the glass panels
1