Using The Accessories; Additional Functions - Electrolux EOC69611 Benutzerinformation

5. The first letter flashes.
Touch + or - to change the letter. Touch
OKto confirm.
6. Touch
or
the right or to the left. Touch OK to con-
firm.
The letter flashes.
7. Repeat steps 5 and 6 again to write
name of the program.
Touch and hold OK to save.
You can overwrite a memory position in
storage. (Refer to the section „Storing a
programme". At step 4 touch

USING THE ACCESSORIES

Warning! Refer to "Safety information"
chapter.
Telescopic runners
Pull the right and left hand telescopic run-
ners out.
Put the shelf or the tray on the telescopic
runners, then carefully push them back in
the oven.

ADDITIONAL FUNCTIONS

Key Lock
The Key Lock prevents an accidental
change of the oven function .
Activating the Key Lock
1. Activate the appliance.
2. Set the oven function.
3. Touch
again and again until the
display shows Key Lock
to move the cursor to
or
°C
to choose memory position you
want to overwrite.)
You can change the name of a Pro-
gramme in the menu " Edit Programme
Name ".
Activating the programme
1. Activate the appliance.
2. Select My Programmes menu. Touch
OK to confirm.
3. Select your favourite programme name.
Touch OK to confirm.
Caution! To prevent a damage to the
door enamel and glass, do not close
the oven door until full telescopic
runners are in the appliance.
4. Touch OK to confirm.
The Key Lock is active.
Deactivating the Key Lock
1. Touch
.
2. Touch OK to confirm.
The Key Lock is not active.
If you deactivate the appliance, the Key
Lock deactivates.
electrolux 31
°C