Clock Functions - Electrolux EOC69611 Benutzerinformation

3. Set the temperature. Touch OK to con-
firm.
Switching off the heating function
Touch to cancel the procedure.
The display shows the main menu.
Setting the oven temperature
Touch + or - to set the temperature.
The appliance starts to heat.
When the appliance operates at the set
temperature, an acoustic signal
sounds.
Showing the oven temperature
Touch + or -at the same time.
The display shows the oven temperature.

CLOCK FUNCTIONS

Symbol Function
Minute Minder
Duration
End Time
You can use Duration and End Time at
the same time, if the appliance is acti-
vated and deactivated automatically
later.
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions Duration
and End Time , the heating elements
deactivate after 90% of the set time.
The appliance uses the residual heat to
continue the cooking process until the
time ends (3-20 minutes).
Setting the clock functions
1. Set a heating function.
2. Touch
again and again until the
display shows the necessary clock func-
tion and the related symbol.
3. Touch + or - to set the necessary time.
Touch OK to confirm.
After 90% of the set time, an acoustic
signal sounds. The appliance deacti-
vates. The display shows a message.
4. Touch a sensor field to stop the signals.
Heat-up indicator
When you activate an oven function, the
bar on the display comes on. The bar
shows that the temperature increases.
Rapid heat-up indicator
For some oven functions the rapid heat-up
function decreases the heat-up time auto-
matically. The bar of the indicator moves
from right to left until the oven reaches the
target temperature.
Residual heat indicator
When you deactivate the appliance, the dis-
play shows the residual heat. You can use
the heat to keep the food warm.
To set a countdown (max 2 hours 30 minutes). This function
has no effect on the operation of the appliance.
To set how long the appliance has to be in operation (max. 23 h
59 min).
To set the switch-off time for an oven function (max. 23 h 59
min).
With Minute Minder you must activate
the appliance to set the clock function.
With Duration and End Time the appli-
ance deactivates automatically.
With Duration and End Time you must
set the heating function and the tem-
perature first. Then you can set the
clock function.
Heat+Hold
The Heat+Hold function keeps prepared
food warm at 80° for 30 minutes. It acti-
vates after the baking or roasting procedure
ends.
Conditions for the function:
• The set temperature is more than
• The function duration is set.
Activating the function
1. Activate the appliance.
2. Select the oven function.
3. Set the temperature above 80°C.
Description
80°C.
electrolux 29