Maintenance; Security Protection; Important Information On Eco; Compatible Disposal - Vortice CALDOPRO PLUS 3000 M Betriebsanleitung

ENGLISH

Maintenance

CALDOPRO PLUS does not normally require any
special maintenance; simply remove the dust that
forms with a soft dry cloth or, if necessary, moisten it
with lukewarm water and a neutral detergent; too
much dust accumulating can cause the appliance to
overheat.
N.B.:
Before carrying out any type of maintenance work,
turn the appliance off and unplug it from the power
supply.

Security protection

N.B.: The appliance is fitted with a safety device
(automatic reset) that cuts off the power supply to the
heater element to prevent any damage in the event of
overheating. Should overheating occur, the appliance
continues running in order to benefit from the cooling
effect created. To avoid the harmful effects of
continual switching on and off, it is necessary to
remove the cause of the trouble (grilles obstructed,
appliance tipped over, fan jammed, etc).
18
Important information on
eco-compatible disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS
PRODUCT DOES
REQUIREMENTS OF THE NATIONAL LAWS
IMPLEMENTING DIRECTIVE WEEE, AND IN THESE
COUNTRIES THE PRODUCT IS NOT SUBJECT TO
SEPARATE DISPOSAL OPERATIONS AT THE END
OF ITS WORKING LIFE.
This product conforms to EU Directive2002/96/EC.
This appliance bears the symbol of
the barred waste
indicates that, at the end of its
useful life, it
must not be disposed of as
domestic waste, but must be
taken to a collection centre for
waste electrical and electronic
equipment, or returned to a retailer on purchase of a
replacement.
It is the user's responsibility to dispose of this
appliance through the appropriate channels at the end
of its useful life. Failure to do so may incur
penalties established by laws governing waste
disposal.
Proper differential collection, and the subsequent
recycling, processing and environmentally compatible
disposal of waste equipment avoids unnecessary
damage to the environment and possible related
healthrisks, and also promotes recycling of the
materials used in the appliance.
For further information on waste collection and
disposal, contact your local waste disposal service, or
the shop from which you purchased the appliance.
Manufacturers and importers fulfil their responsibilities
for recycling, processing and environmentally
compatible disposal either directly or by participating
in collective systems.
NOT FALL WITHIN
bin. This
THE
the