Using The Pbc (Playback Control) Functions; Using The Pbc Functions - Sony DVX-100 Bedienungsanleitung

Using the PBC (playback control) functions

Using the PBC functions

During playback of a PBC compatible Video CD, the PBC
funcions are automatically activated and you can display
the PBC menu. If you do not want to use the PBC
functions, see "Stopping the PBC functions."
MENU TITLE
SUB TITLE AUDIO ANGLE TIME
REPEAT A B SEARCH PLA Y MODE
1 2 3
4 5 6
7 8 9
CLEAR RETURN
0
LIST
ENTER
DISC
SCAN
PLAY
PREV NEXT
SET UP STOP P AUSE
1
During Video CD playback, press MENU.
The PBC menu is displayed.
2
While the PBC menu screen is displayed, press the
number buttons to enter the number of the desired
item.
The current PBC item is displayed at the top of the
screen for about 5 seconds.
Example: to enter the item number, "10"
1 Press 1.
"-1"* appears at the upper left of the screen.
* Complete the next operation before "-1" disappears.
2 Press 0.
"10" appears at the upper left of the screen.
MENU
SEARCH
Number buttons
CLEAR
ENTER
M/,/m/<
PLAYN
STOPx
Note
If you enter a wrong number, press CLEAR. All the input
numbers are cleared.
3
Press ENTER.
If additional selection screens appear, repeat steps 2
(1 and 2) to 3.
Note
The PBC menus differ, depending on the Video CD. Read the
instruction manual supplied with the Video CD.
Stopping the PBC functions
1
During Video CD playback, press STOP.
Playback stops.
"x" flashes for 1 second, and "Resume---" is
displayed. Resuming playback (page 17) is activated.
"x" flashes for 1
second in step 1 and 2
Resume . . .
2
Press STOP.
"Resume---" disappears, and "x" flashes for 1 second.
Resuming playback stops.
3
Press STOP again.
"PBC" at the upper right of the screen disappears.
4
Press PLAY.
Playback starts.
Note
Depending on the Video CD, some of the contents may not be
played if the PBC functions are not activated.
"PBC" disappears in step 3
PBC
33