Relay Play With Two Players; Selecting Tracks With Mp3 Navigator (Mp3 Only) - Pioneer DVJ-X1 Bedienungsanleitung

Advanced Operations

Relay play with two players

# This function is not supported when the rear panel mode select
switch (MODE NORMAL/DJ) is set to the NORMAL position.
Relay play can be performed by using the supplied accessory control
cord to connect the CONTROL connectors of this player and another
CDJ series CD player ( P.13).
¶ Set the auto cue functions of the two players to ON (auto cue (A.CUE)
indicator lights in the display).
¶ If connected to a DJ mixer, set the mixer's fader control to its center
position.
1. Begin playback on the first player.
2. When the currently playing track ends, the other player
(in standby mode) will automatically begin playback.
3. Set the first player to cue standby at the beginning of the
next desired track.
¶ By repeating these steps, you can perform continuous automatic
relay play between the two players.
¶ By replacing the disc on the waiting player and cueing it to a de-
sired track, an unending variety of tracks can be played.
¶ By setting a cue point on the waiting player, playback can be set to
begin automatically from any point in any desired track ( P.36,
"Setting cue points").
Notes:
¶ Relay play may not occur smoothly if the two players' audio
output terminals are not connected to the same DJ mixer.
¶ If power is interrupted to the currently playing player, the other
player will automatically begin playback.
¶ Since fader start and relay play require that the same control
connectors be connected in different ways, they cannot be
performed simultaneously.
40
En <DRB1388>
Selecting tracks with MP3 navigator (MP3
only)
MODE
NORMAL/DJ
1. Press the MENU button.
¶ The MP3 navigator screen will be displayed.
Number of currently playing folder/track
Current:
MENU
00~07
ENTER
Folder: 00.R00T
Total number of folders
Displays folder number together with folder name, or "ROOT".
If folder name is recorded in a code other than English alphanumerics,
a numbering series beginning with "F_001" will be displayed instead.
2. Use the back (5) or forward (∞) sides of the cursor but-
ton to select the desired folder.
¶ If the back (5) or forward (∞) sides of the cursor button is held
depressed continuously, the display will change to the previous/
next folder select screen.
¶ If the right side (3) of the cursor button is pressed, the highlight
will move to the Track menu.
Current:
00~07
Track : 002. TRACK–02
Track number and ID3 tag title
If no alphanumeric ID3 tag is recorded, the file name will be displayed.
If ID3 tag and file name are not recorded as English alphanumerics, a
series number beginning with "T_001" will be displayed.
3. Press the back (5) or forward (∞) sides of the cursor but-
ton to select the desired track.
¶ If the back (5) or forward (∞) sides of the cursor button is held
depressed continuously, the display will change to the previous/
next track select screen.
4. Press the ENTER button.
¶ The selected folder and track will be begin playback.
Total tracks within selected folder
00–001 MP3 Navigator
Folder Track 001~015
00.R00T 001.TRACK–01
01.F0LDER01 002.TRACK–02
02.F0LDER02 003.TRACK–03
03.F0LDER03 004.TRACK–04
04.F0LDER04 005.TRACK–05
ENTER MENU
00–001 MP3 Navigator
Folder Track 001~015
00.R0 001.TRACK–01
01.F0 002.TRACK–02
02.F0 003.TRACK–03
03.F0 004.TRACK–04
04.F0 005.TRACK–05
ENTER MENU