Remote Menu - JVC BR-DV3000E Bedienungsanleitung

REMOTE menu

The REMOTE menu consists of 2 menus. (1/2 and 2/2 menu)
REMOTE (1/2) menu
Items
REMOTE
LOCAL
FUNCTION
PREROLL
REM FF/REW
MODE
BR-DV3000_E_p50-71
Setting
OFF Use this menu item to enable/disable the REMOTE SEL. switch on
ON the front panel:
OFF : Disables the 9 PIN/SERIAL setting of the REMOTE SEL.
switch.
ON : Enables the 9 PIN/SERIAL setting of the REMOTE SEL.
switch. Use this setting when remote controlling the unit via
the 9 PIN and SERIAL terminal.
NO KEY Use this to select the buttons on the main unit to be rendered oper-
EJECT able when remote controlling the unit via the 9 PIN REMOTE ter-
STP + EJT minal or the SERIAL REMOTE terminal:
ALL KEYS NO KEY : No button enabled.
EJECT : Only the EJECT button enabled.
STP + EJT : Only the STOP button and the EJECT button are ena-
bled.
ALL KEYS : All operation buttons are enabled.
Memo
If the OPERATION LOCK item of the SYSTEM (2/2) menu is set
as ON, the buttons on the main unit will be disabled regardless of
the setting here.
3SEC When remote controlling the unit via the 9 PIN REMOTE terminal,
5SEC use this item to set the PREROLL time of the unit. Configurations
7SEC done via the editing remote controller prevail over other settings:
10SE 3SEC : 3 seconds
5SEC : 5 seconds
7SEC : 7 seconds
10SEC : 10 seconds
Memo
To enhance editing precision, please set it to at least 7 seconds.
FF/REW Use this menu item to set the action to be performed when an FF/
SEARCH REW command is received via the 9 PIN REMOTE terminal or DV
terminal:
FF/REW : Sets the unit to execute FF/REW when a command is
received. This is the usual setting.
SEARCH : Sets the unit to go into the SEARCH state when a
command is received. Use this setting if the locate(cue
up) function does not work well.
59
Contents
13/01/03, 11:39 AM
E-59