IKEA HJÄLPSAM Bedienungsanleitung Seite 9

ENGLISH
Manual adjustment
1
Electronic adjustment
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Press and hold the programme button
until the programme indicator (A) flash-
es and the programme indicator (B)
comes on.
4. Wait until the programme indicator (B)
goes off and the end indicator starts to
flash (the programme indicator (A) con-
tinues to flash).
5. Press the programme button.
• The end indicator flashes intermittent-
ly. The number of flashes shows the
level of the water softener. Example:
5 flashes + pause + 5 flashes = level 5.
6. To adjust the level of the water softener,
press the programme button. Each time
you press the programme button you go
to the next level.
7. Deactivate the appliance to confirm.
Filling the salt container
Caution! Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent this, after the
replenishment, start a programme.
2
Turn the water
hardness dial to the
position 1 or 2.
1
3
Put 1 litre of water
in the salt container
(only for the first
time).
5
Filling the rinse aid dispenser
1
2
4
Put 1 kg of salt in
the salt container.
6
2
9