Herunterladen Inhalt Inhalt Diese Seite drucken

Specialist Installer Qualification; Intended Use - Maico ECA 100 ipro Montage- Und Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

UK │ Table of contents
ECA 100 ipro fans
Please read the instructions carefully
before mounting and using for the
first time. Follow the instructions.
Pass these instructions onto the
owner for safekeeping.
Unit overview, Fig. A - C
1
Housing with motor
2
Impeller
3
Cable grommet
4
Electronics cover
5
Internal grille or internal shutter
5.1 Fixed internal grille
5.2 Electrically operated internal shutter
5.3 Bimetal
6
Cover
7
Designer cover
8
Electronic circuit boards
8.1 Standard electronics
8.2 Sensor electronics
(only for models F, H and B)
8.3 VZC electronics
9
Sensors
9.1 Motion sensor "B"
9.2 Light sensor "F"
9.3 Humidity sensor "H"
10 Start delay/overrun time for LEDs
11 Start delay setting button
12 Overrun time setting button
Table of contents
2. Intended use .......................................... 12
4. Operation ............................................... 15
5. Product information ................................ 15
limits ....................................................... 16
7. Technical data ........................................ 16
8. Installation preparations ......................... 16
8.1 Wall ................................................. 16
8.2 Ceiling ............................................. 17
12
8.3 Duct ................................................ 17
8.4 Fan.................................................. 17
9. Installation .............................................. 17
9.1 Installing housing ............................ 17
9.2 Electrical connection ....................... 18
9.3 Operating programs ........................ 18
9.4 Start-up ........................................... 20
10. Maintenance ........................................ 20
11. Cleaning ............................................... 20
12. Fault rectification .................................. 21
13. Dismantling .......................................... 22
15. Wiring diagrams ................................... 34

1. Specialist installer qualification

Mounting may only be carried out by spe-
cialists who have the necessary knowledge
and experience in ventilation engineering.
Only a trained electrician is permitted to
work on the electrics. You are deemed a
trained electrician if you are familiar with the
relevant standards and guidelines, can
competently and safely connect units to an
electrical power supply in line with the
attached wiring diagram and are able to
recognise and avoid risks and dangers
associated with electricity on the basis of
your technical training and experience.

2. Intended use

Fan for extracting air from bathrooms,
toilet rooms, storage rooms, showrooms,
offices, fitness studios, changing rooms and
similar places.
Acknowledgements
© Maico Elektroapparate-Fabrik GmbH. This
instruction is a translation of the German original
operating instructions. We cannot be held responsible
for mistakes or printing errors and retain the right to
make technical modifications without giving prior
notice.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis