Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.8. Temperature measurements
Warning!
To avoid electric shock, disconnect both test probes from any
source of voltage before making a temperature measurement.
1. If you wish to measure temperature in °F, set the function
switch to the °F range. If you wish to measure temperature in
°C, set the function switch to the °C range.
2. Insert the temperature probe into the V//Hz/
COM-terminal.
3. Touch the Temperature probe head to the part whose
temperature you wish to measure. Keep the probe touching the
part under test until the reading stabilizes (about 30 seconds).
4. Read the temperature in the display. The digital reading will
indicate the proper decimal point and value.
Warning!
To avoid electric shock, be sure, that the thermocouple has been
removed before changing to another measurement function.
-52-
-terminal and
Werbung
