Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fig. 13
Fig. 15
Fig. 17
13.1
Mounting and changing the diamond saw blade
Plug power connector removed.
Cover the side of worktop fold right up.
splash protection at cut-off wheel to remove. Fig. 7
Hex nut with washer on the motor shaft and take off the diamond wheel. Fig. 8
Pay attention to the direction of rotation When placing the diamond blade.
the separating plate With washer and 6-point nut. Fig. 10
Refit the splash guard to the eyes. Fig. 11
Z.I.P.P.E.R Maschinen Austria www.Zipper-maschinen.at
Fliesenschneider / Stone cutting machine ZI-FS115
Fig. 14
Fig. 16
ASSEMBLY
Seite 20
Werbung
Inhaltsverzeichnis
Fehlerbehebung
