Maintenance; Changing The Saw Blade (7.1.3); Maintenance Plan - Zipper ZI-TKS250H Bedienungsanleitung

15

MAINTENANCE

No cleaning, upkeep, checks or maintenance when machine is running
Be safe: Shut off the machine, let it cool down, disconnect spark plug cap from spark plug.
The machine does not require intense maintenance. However, to ensure a long lifespan, we
strongly recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
15.1.1 Changing the saw blade (14.1.3)
WHEN:
 Change saw blades with different teeth
 Replacement of a defective, worn saw blade
ATTENTION: Use only blades with
Max. Ø 250mm

Hole Ø 30mm

Max. Thickness 2,8mm

For 4700 min

15.2

Maintenance plan

Controls for the maintenance of the machine
Loose or lost screws, nuts, bolts
Loose safety bolt
Damage of any part of the machine
Machine cleaning
ZIPPER MASCHINEN GmbH
TISCHKREISSÄGE / TABLE SAW
and more
-1
www.Zipper-Maschinen.at
ZI-TKS 250H / ZI-TKS 250-2VBite 31
A T T E N T I O N
Regularly prior to each operation
Regularly after and prior to each operation
Regularly prior to each operation
Regularly after operation
MAINTENANCE
Seite 31