Specifications; Standard Accessories; Optional Accessories - Hitachi WR 16SA Bedienungsanleitung

English
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of
children and infirm persons.
PRECAUTIONS ON USING IMPACT WRENCH
1. When using the tool at a hight, make sure that there
is nobody below.
2. Use earplugs if using for a long time use.

SPECIFICATIONS

Voltage (by areas)*
Power input*
No load speed
Capacities (size of bolts)
Tightening torque**
Angle drive
Weight (without cord)
* Be sure to check the nameplate on product as it is subject to change by areas.
** Tightening the bolt without extension cord at rated voltage.

STANDARD ACCESSORIES

(1) Side handle ............................................................... 1
(2) Case ........................................................................... 1
Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES

(sold separately)
1. Variety of sockets
Although the Hitachi Impact Wrench is delivered
with only one standard socket, ample sockets are
available to cover impact tightening of various sizes
and types of bolts.
S
5
(110V, 115V, 120V, 127V, 220V, 230V, 240V)
L
E
3. Switch the reversing switch only after the motor
has stoped when it is necessary to change the
direction of the rotation.
4. Use a step up transformer when a long extension
cable is used.
5. Confirm the tightening torque by a torque wrench
before use in order to assertain the correct tightening
torque to be used.
6. Assemble the socket securely to the impact wrench
with the socket pin and ring.
7. Confirm whether the socket has any cracks in it.
8. Always hold the body and side handles of the
impact wrench firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
420 W, 450 W
-1
1700 min
M12-M16 (High tension bolt)
M12-M22 (Ordinary bolt)
Maximum 30.6 kg-m
12.7 mm
2.9 kg