Hitachi DH 25DAL Bedienungsanleitung Seite 9

OPTIONAL ACCESSORIES (sold separately)
1. Battery (BSL2530, BSL3626)
It m ay be convenient to prepare som e extra batteries.
2. Drilling anchor holes (rotation + hammering)
Drill bit (taper shank) and taper shank adapter
Drill bit (taper shank)
Drill bit
Outer diam eter
11.0 m m
12.3 m m
12.7 m m
14.3 m m
14.5 m m
17.5 m m
21.5 m m
Taper shank adapter
Taper m ode
M orse taper Drill bit
(No. 1) (taper shank)
M orse taper Drill bit
(No. 2) (taper shank)
Taper shank adapter form ed A-taper
A-taper
or B-taper is provided as an optional
accessory, but drill bit for it is not
B-taper
provided.
13 m m Ham m er Drill chuck and Chuck w rench
Im pact Drill Application
(
Straight Shank Bit
3. Anchor setting (rotation + hammering)
Anchor setting adapter (for rotary ham m er)
Anchor size
W1/4"
W5/16"
W3/8"
Taper shank adapter
(SDS plus shank)
Cotter
Applicable drill bit
11.0 – 17.5 m m
21.5 m m
)
13 m m Ham m er
Drill Chuck
(SDS plus shank)
Chuck w rench
Anchor setting adapter
(for rotary ham m er)
(SDS plus shank)
Anchor setting adapter (for m anual ham m er)
Anchor size
W1/4"
W5/16"
Anchor setting adapter
W3/8"
(for m anual ham m er)
W1/2"
W5/8"
4. Bolt placing operation w ith Chemical Anchor.
(rotation + hammering)
( )
Standard socket
on the m arket
5. Demolishing operation (Hammering only)
(M odel DH25DAL and DH36DAL only)
Bull point (Round type) (SDS-plus shank)
Bull point (Square type) (SDS-plus shank)
6. Groove digging and edging (Hammering only)
Cold chisel (SDS-plus shank) (M odel DH25DAL and
DH36DAL only)
Cutter (SDS-plus shank) (M odel DH25DAL and
DH36DAL only)
7. Grooving (Hammering only)
Grooving chisel (SDS-plus shank) (M odel DH25DAL
and DH36DAL only)
8. Drilling holes and driving screw s (rotation only)
Drill chuck, chuck adapter (G) and chuck w rench
Special Drill chuck (13VLR)
screw
Chuck w rench
9. Drilling holes (rotation only)
Drill chuck (13VLA)
Chuck w rench
13 m m drill chuck ass'y (include chuck w rench
ass'y) and chuck (for drilling in steel or w ood).
English
(SDS-plus shank)
12.7 mm Chemical Anchor Adapter
19 mm Chemical Anchor Adapter
Chuck adapter (G)
(SDS plus shank)
Chuck adapter (D)
(SDS plus shank)
8