Battery Rem Oval/ Installation - Hitachi DH 25DAL Bedienungsanleitung

English
10. Driving Screw s (rotation only)
Bit
No.
Bit No. Screw Size
No. 2
No. 3
11. Dust cup, Dust collector (B)
Dust cup
Optional accessories are subject to change w ithout notice.
APPLICATIONS
Rotation and ham m ering function
Drilling anchor holes
Drilling holes in concrete
Drilling holes in tile
Rotation only function
Drilling in steel or w ood
(w ith optional accessories)
Tightening m achine screw s, w ood screw s
(w ith optional accessories)
Ham m ering only function (M odel DH25DAL and DH36DAL
only)
Light-duty chiselling of concrete, groove digging
and edging.
Table 1
Before Blinks
charging (RED)
While Lights
(RED)
charging
Blinks
Charging
(RED)
com plete
Charging Flikers
im possible (RED)
Overheat Lights
standby (GREEN)
NOTE: When standby for cooling battery, UC36YRL cools the overheated battery by cooling fan.
9
Chuck adapter (D)
(SDS plus shank)
Length
3–5 m m 25 m m
5–8 m m 25 m m
Dust collector (B)
Indications of the lam ps
Lights for 0.5 seconds. Does not light for
0.5 seconds. (off for 0.5 seconds)
Lights continuously
Lights for 0.5 seconds. Does not light for
0.5 seconds. (off for 0.5 seconds)
Lights for 0.1 seconds. Does not light for
0.1 seconds. (off for 0.1 seconds)
Lights continuously

BATTERY REM OVAL/ INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latches
to rem ove the battery (see Figs. 1 and 2).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery aligning both guide rail of battery
and body. M ake sure the battery is fixed firm ly.
CHARGING
Before using the pow er tool, charge the battery as follow s.
1. Connect the charger's pow er cord to a receptacle
When the pow er cord is connected, the charger's
pilot lam p w ill blink in red (At 1-second intervals).
2. Insert the battery into the charger
Insert the battery firm ly, until it contacts the bottom
of the charger com partm ent.
CAUTION
If the battery is inserted in the reverse direction,
not only recharging w ill becom e im possible, but it
m ay also cause problem s in the charger such as
deform ed recharging term inal.
3. Charging
When inserting a battery in the charger, charging
w ill com m ence and the pilot lam p w ill light up
continuously in red.
When the battery becom es fully recharged, the pilot
lam p w ill blink in red (At 1-second intervals) (See
Table 1).
(1) Pilot lam p indication
The indications of the pilot lam p w ill be as show n
in Table 1, according to the condition of the charger
or the rechargeable battery.
M alfunction in the battery
or the charger.
Battery overheated.
Unable to charge
(Charging w ill com m ence
w hen battery cools).