Working Advice - Bosch PLL 5 Originalbetriebsanleitung

OBJ_BUCH-311-006.book Page 22 Wednesday, July 24, 2013 12:56 PM
22 | English

Working Advice

 Keep the adhesive tape strips 4 out of the reach of small children.
Children could mistake the strips with chewing gum.
Mounting to a Wall
Four fastening methods are available for fastening the wall holder to dif-
ferent surfaces:
– Fastening with Adhesive Tape Strips (see figure G): With the remov-
able adhesive tape strips 4, the wall holder can be fastened to sensitive
or delicate sturctural materials without causing damage to them. The
structural surface must be straight, firm, dry, grease-free and have a
temperature of at least 15 °C . Pull off one of the protective foils from
an adhesive tape strip () and position the adhesive tape strip onto
the back side of the wall holder () in such a manner that its end pro-
jects out. Pull off the second protective foil () and firmly press the
wall holder with the adhesive tape strip against the structural surface
() for at least five seconds. To remove the wall holder, pull out the ad-
hesive tape strip by the projecting end slowly and as parallel as possi-
ble to the structural surface ().
– Fastening with Pins (see figure H): With the pins 2 provided, the wall
holder can be fastened to drywall or wooden walls. Insert the pins
through the openings in the wall holder as shown in the figure.
– Fastening with a Screw: Place the wall holder 1 via the opening on the
back side onto a screw that projects lightly out of the wall.
– Fastening with Adhesive Tape (see figure I): The wall holder can also
be fastened with commercially available adhesive tape (not included in
the delivery scope) as shown in the figure.
For all four fastening methods, pay attention that the wall holder 1 is fas-
tened securely to the structural surface. Faulty measurements can result
when the wall holder slips away.
Attach the measuring tool via the magnets 14 onto the metal plate 3 of the
wall holder 1.
Belt Clip
With the belt clip 5, the measuring tool, as an example, can be hooked to
a belt and is always at hand.
1 609 92A 0FS | (24.7.13) Bosch Power Tools