Finish Operation; Transport, Storage; Maintenance And Care - Kärcher VC 6.150 Bedienungsanleitung

ComfoGlide nozzle
Illustration
 Carpets and carpeted floors:
Select the following switch setting:
Illustration
 Hard surfaces:
Select the following switch setting:

Finish operation

 Turn off the appliance and disconnect
the mains plug.
Illustration
 Push the take-up cable button. The ca-
ble will pull itself automatically into the
appliance.
 Hang the floor nozzle on the backside
of the appliance into the parking holder,
and push into the pause position.

Transport, storage

 Hold the appliance at the carrying han-
dle when you want to transport it and
store it in dry rooms.
Note: It is recommended that you first
completely push in the telescopic suc-
tion pipe.

Maintenance and care

Risk of injury
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
Cleaning the device
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
14
 Clean the appliance and accessory
parts made of plastic with a commercial
plastic cleaner.
 Clean the dust chamber with a dry wipe
cloth/ dust brush.
Replacing the filter bag
Order no. 6.904-329
Contents: 5 filter bags with cap and 1 en-
gine protection filter.
Note: Separate the telescopic suction pipe
from the handle to see the filter change in-
dicator.
Illustration
 If the filter change indicator in the cover
glows red, then please change the filter
bag.
 Use the closing lever and open the lid.
Illustration
 Unlock the holder of the filter bags and
pull towards the outside.
Illustration
 Close the filter bag using the closing
flap, remove the filter bag and dispose it
off.
Illustration
 Push the new filter bag into the support
until the stop. First press the flap down-
wards; then push the holder into the
casing and lock it at the appliance cas-
ing.
Caution
Close the lid only, if there is a filter bag in-
serted. After picking up small dust particle
(as for example plaster, cement etc) clean
the motor protection filter, change if neces-
sary.
Change the motor protection filter
Motor protection filter: change before the
last filter bag is removed from the filter bag
package.
 The motor protection filter is behind the
inserted filter bag. Change the motor
protection filter before you insert the fil-
ter bag.
Illustration
 Unlock the frame and remove.
– 8
EN