Operation - Kärcher BR 45 Originalbetriebsanleitung

Charging battery
Note:
The device is equipped with a safety mech-
anism to prevent total discharge, i.e. when
the permissible minimum capacity is
reached, the machine will be shut off.
The charging time takes approx. 4.5 hours.
The charger automatically switches off the
charging process.
If necessary, the appliance can be used
again before the battery has been fully
charged.
 Insert the mains plug into the socket.

Operation

 Release the star knob for the transport
position.
 Straighten the steering column.
 Tighten the star handle.
Inserting the EPA filter (optional)
 Open the cover of the fresh water reser-
voir.
1 Locking
2 Filter casing
3 EPA filter
 Push in both locking mechanisms and
remove the filter casing.
 Insert the EPA filter in the filter casing.
 Attach the filter casing on the cover of
the waste water tank and engage the
locking mechanism.
 Close the cover of the dirt water reser-
voir.
20
Filling in detergents
WARNING
Risk of damage. Only use the recommend-
ed detergents. With other detergents, the
operator bears the increased risk regarding
the operational safety, risk of accident and
reduced service life of the appliance. Only
use detergents that are free of solvents, hy-
drochloric acid and hydrofluoric acid.
Follow the safety instructions for using de-
tergents.
Note:
Do not use highly foaming detergents.
Observe the dosing notes.
 Remove dosing lid of the fresh water
tank.
 Fill in fresh water (maximum 50 °C).
Use the filler hose (accessories) if
needed.
 Add detergent using the dosing lid. One
capful corresponds to a 1% application.
Recommended detergents:
Application
Regular cleaning
(even for floors sensitive
to alkalies)
Basic cleaning (strip-
ping) of alkali-resistant
hard coatings
Basic cleaning (strip-
ping) linoleum
Base cleaner, acidic
Disinfection cleaning
Detergents are available in specialised
stores.
 Close the dosing lid of the fresh water
reservoir.
– 5
EN
Detergent
RM 745
RM 746
RM 752
RM 754
RM 751
RM 732