Before Startup; Connecting The Battery - Kärcher BR 45 Originalbetriebsanleitung

1 Dosage cleaning solution
2 Switch for detergent solution
3 Control lamp to apply detergent solution
4 Indicator lamp vacuuming
Green: Suction turbine in operation
Orange, flashing: Suction turbine over-
loaded
5 Indicator lamp brush drive
Green: Brush is rotating
Orange, flashing: Brush overloaded
6 Battery status display
In operation:
Green Battery charged
Orange: Battery almost empty
Red Appliance swithces off: Load battery
When charging the battery:
Orange blinking: Battery is being
charged.
Green: Charging is complete.
Red: Fault during charging process.
7 Indicator lamp Eco mode
Blue: Eco mode
Off: Full power
8 Switch Eco mode
9 Power switch
Symbols on the machine
Fresh water filler neck
Pedal suction bar
Transport chassis rotary knob
Guide for tie down strap during
transport in vehicles
Contact pressure of the roller
brush

Before Startup

Connecting the battery

1 Screw
2 Charger
 Unscrew 2 screws.
 Swivel the charger down.
1 Battery
2 Plug
 Attach both plugs and tighten.
– 4
EN 19