Safety Instructions; Ec Declaration Of Conformity - PR electronics 5343B Bedienungsanleitung

Safety instructions

Ex installation:
For a safe installation of 5343B in hazardous area the following must be
observed. The module must only be installed by qualified personnel who are
familiar with the national and international laws, directives and standards that
apply to this area.
Year of manufacture can be taken from the first two digits in the serial number.
For installation requirements and Ex / I.S. data see ATEX certificate.
16 16

EC DECLARATION OF CONFORMITY

As manufacturer
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
hereby declares that the following product:
Type: 5343
Name: 2-wire level transmitter
is in conformity with the following directives and standards:
The EMC Directive 2004/108/EC and later amendments
EN 61326-1 : 2006
For specification of the acceptable EMC performance level, refer to the
electrical specifications for the module.
The ATEX Directive 94/9/EC and later amendments
EN 50014 : 1997 +A1, A2, EN 50020 : 2002,
EN 50281-1-1 : 1998 + A1 and EN 50284 : 1999
ATEX certificate: KEMA 03ATEX1538 X (5343B)
No changes are required to enable compliance with the replacement standards:
EN 60079-0 : 2006 and EN 60079-11 : 2007
Notified body:
KEMA Quality B.V. (0344)
Utrechtseweg 310, 6812 AR Arnhem
P.O. Box 5185, 6802 ED Arnhem
The Netherlands
Rønde, 7 April 2009 Peter Rasmussen
Manufacturer's signature
17 17