Application; Technical Characteristics; Mounting / Installation - PR electronics 5343B Bedienungsanleitung

2-WIRE LEVEL TRANSMITTER
PRelevel 5343
• Potentiometer or Ohmic input
• Programmable sensor error value
• High measurement accuracy
• Unique process calibration function
• Programmable via standard PC

Application:

• Conversion of resistance variation to standard analogue current signals, e.g.
from Ohmic level sensors or valve positions.
• User-defined linearisation function can be activated.

Technical characteristics:

• Within a few seconds the user can program PR5343 to measure within the
defined Ohmic values.
• Continuous check of vital stored data for safety reasons.
• The transmitter is protected against polarity reversal.
• PR5343 is configured to the current task by way of a PC, the PRelevel
software and the communications interface Loop Link.
• The PRelevel software has been developed specifically for the configuration
of level applications. Among other things, it contains a function for "on line"
measurement of input span as well as a linearisation function for volume linear
output from horizontal cylindrical tanks.

Mounting / installation:

• For DIN form B sensor head mounting. In non-hazardous areas the 5343 can
be mounted on a DIN rail with a special fitting.
• NB: As Ex barrier for 5343B we recommend 5104B, 5114B or 5116B.
18 18
Ohmic level sensor
to 4...20 mA
Potentiometer
to 4...20 mA
Resistance to 4...20 mA
2-wire installation
in control room
V+
mA
2-wire installation
in control room
V+
mA
2-wire installation
in control room
V+
mA
19 19