Safety Instructions; Declaration Of Conformity - PR electronics 5331 Bedienungsanleitung

Safety instructions

Ex installation:
For a safe installation of 5331B, C and D in hazardous area the following must
be observed. The module must only be installed by qualified personnel who
are familiar with the national and international laws, directives and standards
that apply to this area.
Year of manufacture can be taken from the first two digits in the serial number.
For installlation requirements and Ex data see ATEX certificate.
14

DECLARATION OF CONFORMITY

As manufacturer
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
hereby declares that the following product:
Type: 5331
Name: 2-Wire programmable transmitter
is in conformity with the following directives and standards:
EMC directive 2004/108/EC and later amendments
EN 61326
This declaration is issued in compliance with article 10, subclause 1 of the EMC
directive. For specification of the acceptable EMC performance level, refer to
the electrical specifications for the module.
The ATEX directive 94/9/EC and later amendments
EN 50 014 and EN 50 020
ATEX certificate: DEMKO 99ATEX126962
Notified body for CENELEC/ATEX: UL International Demko A/S 0539
Rønde, 6 Oct. 2005
Peter Rasmussen
Manufacturer's signature
15