Program Overview; Manual Settings - BASETech 1539300 Bedienungsanleitung

• Repeat steps 1 - 7 to configure the remaining days.
• Once everything is configured, press the "OK" button to confirm your selection.
e) Program overview
With the program overview, you can recall and check programs already config-
ured.
1 Press and hold the "PROG" button to
enter the program settings menu.
Press the "SELECT" button 4 times
until "7AY" is shown on the display.
2 Press the "PROG" button to set the
day for the overview. Use the "SE-
LECT" button to toggle between the
days.
3 By pressing the "PROG" button again,
you can call up the program overview
for the selected day. With the "
and " " buttons to are able to control
each hour within the program.
4 To return to the program setting menu, press the "PROG" button again.
Then press the "OK" button to return to the display.
f) Manual settings
By means of the manual settings you can edit and change configured programs.
• Editing the current program temperature status:
Press the "TEMP" button to toggle between the various temperature func-
tions. The program temperature status will be applied during the next hour.
The symbol for the manual steps appears on the display.
"
51