BASETech 1539300 Bedienungsanleitung Seite 51

2 Next, select the day for your pro-
gram settings. To do this, press the
"SELECT" button. As shown in the
image, this allows you to choose,
for example, Monday as the first day
of your 7-dayprogram. Press the
"PROG" button to configure the program for the selected day.
3 Now you can set the program parameters for the selected day. The program
setting starts at 0:00 every day.
4 Press the "TEMP" button to set one of the following five functions:
- Comfort
- Semi-Comfort
- Economic
- Anti-Frozen
- Off
5 Press the buttons "
lect the individual hours. The setting
is maintained until you change it by
pressing the "TEMP" button.
6 Press the "PROG" button to exit your
program settings. Then you can set
the remaining days as described in
steps 3 to 5.
7 When you choose to have the same
program on two days, you can use the
"COPY" function which easily copies
programs. Press the "COPY" button
at the start of the program configura-
tion for the day. The display shows
the "COPY" icon. To confirm the copy
function, press the "OK" button.
50
two points are shown
one point is shown
no point; moon is shown on the display
no point; snowflake is shown on the display
no point; Off is shown on the display
" and " " to se-