Mounting Wall-Mounted Charging Station And; Charging The Blower - Stihl BGA 45 Gebrauchsanleitung

6 Charging the Blower, LEDs
► Insert the charger plug (4) in the charge socket (5).
The LEDs (6) glow green and show the state of charge.
► If the LEDs (6) stop glowing: Disconnect the charger plug
(4) from the charge socket (5).
The blower is fully charged.
► Disconnect the plug (2) from the wall outlet (1).
6.2

Mounting Wall-Mounted Charging Station and

Charging the Blower

b
► Screw the wall-mounted charging station (1) to a wall,
making sure that:
– Suitable fixing materials are used.
– The arrows
point vertically upwards.
– The following dimensions are observed:
– a = at least 100 mm
– b = between 920 mm and 1240 mm
– c = 5 mm
The charging process starts automatically
when the plug is inserted in a wall outlet and
the blower is fitted in the wall-mounted
charging station. The charging process stops
automatically when the blower is fully
charged.
0458-719-9621-A
2
5
5
c
► Slide the retainer (5) to one side.
► Insert the charge plug (4) in the charging station (1) and
push the connecting cable (2) into the guide (3).
► Release the retainer (5).
The retainer (5) springs back to its original position and
1
holds the charge plug (4) in the charging station (1).
► Remove the activation key.
6
7
► Insert the plug (7) in a convenient wall outlet (6).
► Hold the blower (9) with both hands and push it squarely
into the charging station (1).
The blower (9) engages in position audibly.
The LEDs (8) glow green and show the state of charge.
4
3
1
2
English
1
8
9
33