State Of Charge; Leds On Battery; Led On Charger; Assembling The Blower - Stihl BGA 56 Gebrauchsanleitung

English
► Remove the battery (2).
6.2

State of Charge

1
► Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate
the state of charge.
► If the LED on the right flashes green: Charge the battery.
6.3

LEDs on Battery

The LEDs can show the state of charge or malfunctions. The
LEDs can glow or flash green or red.
The state of charge is indicated when the LEDs glow or flash
green.
► If the LEDs glow or flash red: Troubleshooting, @ 17.1.
Malfunction in blower or battery.
6.4

LED on Charger

The LED indicates the operating status of the charger.
If the LED glows green, the battery is being charged.
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.
36

7 Assembling the Blower

7.1
The nozzle can be mounted to the blower tube in three
80-100%
positions to suit the height and reach of the user. The
60-80%
positions are marked on the blower tube.
40-60%
20-40%
► Switch off the blower and remove the battery.
0-20%
1
► Line up the lug (3) and the slot (2).
► Push nozzle (1) into required position on blower tube (4).
► Rotate nozzle (1) until it engages.

Mounting, Adjusting and Removing the Nozzle

2
7 Assembling the Blower
3
4
0458-712-9621-B