Noise/Vibration Information; Declaration Of Conformity - Bosch PMF 180 E Multi Originalbetriebsanleitung

OBJ_BUCH-345-006.book Page 16 Wednesday, May 12, 2010 12:48 PM
16 | English

Noise/Vibration Information

Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 85 dB(A); Sound
power level 96 dB(A). Uncertainty K <1.5 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Sanding: Vibration emission value a
2
uncertainty K<2.0 m/s
Cutting with plunge cut saw blade: Vibration
emission value a =9.9 m/s
h
2
K<1.5 m/s
Cutting with segmential saw blade: Vibration
emission value a =5.0 m/s
h
2
K<1.5 m/s
Scraping: Vibration emission value
2
a =11.4 m/s , uncertainty K=2.2 m/s
h
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly in-
crease the exposure level over the total working
period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may
significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
2 609 004 835 | (12.5.10)

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
2
=6.4 m/s ,
h
Dr. Egbert Schneider
Senior Vice President
2
, uncertainty
Engineering
2
, uncertainty
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
2
.
Leinfelden, 18.03.2010
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools