Using The Control Panel Power Switch (Sleep Mode); Turning Off The Main Power - Canon imageRUNNER 1740i Anwenderhandbuch

Using the Control Panel Power Switch (Sleep Mode)

2

Turning OFF the Main Power

IMPORTANT
If you need to turn ON the machine immediately after it is turned OFF (such as when
restarting the machine), wait at least 10 seconds before turning it ON again. (See
"Restarting the Machine," on p. 5-12.)
NOTE
You can use the Auto Shutdown Time setting to automatically shut down the machine.
(See Chapter 3, "Configuring the Machine's Basic Settings," in the Reference Guide.)
2-22
Turning ON/OFF the Machine
Control Panel Power Switch
ON
OFF
To turn the control panel ON or OFF, press
the control panel power switch. When the
control panel is turned OFF, the machine is
in the Sleep mode.
NOTE
• The machine will not enter the Sleep mode
when it is in operation.
• The machine can receive, forward, or print
documents when it is in the Sleep mode.
Machine Status
Ready
Sleep mode
To safely turn OFF the machine's main
power, press the main power switch
(located on the left side of the machine)
to the " " side.
The main power indicator on the control
panel is turned OFF.
WARNING
Do not unplug the power cord
before turning OFF the main power.
Doing so may result in electrical
shock, damage the machine, or
destroy the stored data.