Using The Machine With Limited Functions - Canon imageRUNNER 1740i Anwenderhandbuch

Using the Machine with Limited Functions

If the Service Call Message screen appears indicating a malfunction of the optional
finisher, you can clear the screen by setting the machine to the Limited Functions
Mode. In this mode, you can continue operating the machine by disabling the
finisher functions.
IMPORTANT
If the main power is turned OFF, all the jobs in the machine's memory will be erased.
NOTE
• Setting the machine to the Limited Functions Mode from the Service Call Message
screen enables the Limited Functions Mode in Common Settings. (See Chapter 3,
"Configuring the Machine's Basic Settings," in the Reference Guide.)
• The Service Call Message screen may re-appear if the Limited Functions Mode is
deactivated without isolating the cause of the malfunction.
1
2
3
Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
Press [Limited Fnctns Mode].
NOTE
If you want to turn OFF the machine,
press [Shutdown].
Press [Yes].
To quit, press [No].
Service Call Message
5
5-13