Canon imageRUNNER 1740i Anwenderhandbuch Seite 56

5
Configure the fax settings.
NOTE
The screens for the fax settings appear only when the optional Super G3 Fax
Board-AJ1 is attached to the machine.
The following keys are also available as necessary.
[Space]:
[+]:
[Backspace]:
NOTE
If you make a mistake when entering numbers, press
correct numbers.
❑
❑
Press to insert a space between the area code and the local fax
number.
Press to insert a country code. Insert a plus sign (+) after the
country code, and before the fax number.
Press to delete the character immediately to the left of the cursor.
Press [Next].
Enter the unit telephone number (up to
20 digits) using -
➞ press [Next].
If you want to configure the setting later,
leave the box blank and press [Next].
(Clear) ➞ enter the
Turning ON/OFF the Machine
2
(numeric keys)
2-19