Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Main Power and Control Panel
Power
The machine is provided with two power switches, a main power switch and a control panel power switch.
How to Turn ON the Main Power
This section explains how to turn ON the main power.
IMPORTANT
If you want to turn OFF the main power and then back ON again, wait for at least 10 seconds after the main power indicator
is turned OFF before turning ON the main power.
1
1
Make sure that the power plug is firmly inserted into the power outlet.
Do not connect or disconnect the power cord with wet hands, as this may result in electrical
shock.
Turn ON the main power.
The main power indicator on the control panel lights when you turn ON the main power switch.
Various screens appear when system software is loading.
If you are using a login service, log in using the procedure for the login service you are using.
NOTE
•
You can change the default display that appears after the machine is turned ON from [Default Screen at
Startup] on the Settings/Registration screen. (See e-Manual > Settings/Registration.)
•
If this machine is connected to a powered off Macintosh computer by USB cable, the computer may turn
on automatically when this machine does. In this case, disconnect the USB cable from the machine. You
may also be able to solve this problem by using a USB hub between the machine and the Macintosh.
•
The response of the buttons and keys may not be optimal immediately after you turn ON the main power
of the machine.
•
If you are using Department ID Management with the Card Reader-C1/Copy Card Reader-F1, see e-
Manual > Optional Products/Software.
•
If you are using Department ID Management, see e-Manual > Basic Operations.
•
If you are using SSO-H, see e-Manual > Basic Operations.
1
3
("I" side)
2
1. Open the main power switch cover.
2. Press the main power switch to the
"I" side.
3. Close the main power switch cover.
Werbung
Inhaltsverzeichnis
