Conino Lamborghini PC 41 TL Originalbetriebsanleitung Seite 22

CONTENTS
1. Intended / not intended use
2. Parts location
3. Symbols on the machine
4. For safe operation
5. Installing guide bar and saw chain
6. Fuel and chain oil
7. Operation
8. Sawing
9. Maintenance
10. Maintenance of Saw Chain and Guide Bar
11. Storage
12. Waste disposal and environmental protection
13. Warrenty
14. Troubleshooting guide
15. Specifications
16. EC Declaration of Conformity
SAFETY FIRST
Instructions contained in warnings within this manual marked with a
taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such
instructions carefully and follow them without fail.
WARNINGS IN THE MANUAL
WARNING
This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily
injury or death.
IMPORTANT
This mark indicates instructions which must be followed, or it leads to mechanical failure, breakdown, or damage.
NOTE
This mark indicates hints or directions useful in the use of the product.
Attention ! Read these notes before you start working with the saw and keep them.
Read the instructions carefully. Familiarise with the control elements so that you are able to safely operate
the device. Always keep these Operating Instructions together with the chain saw.
Attention! Risk of hearing defects.
Under normal operating conditions, this device can expose the operator to a noise level of 80 dB(A) or
more.
Attention: Noise protection ! Please observe the local regulations when operating your device.
GB | Operating Instructions
2
4
5
5
7
8
8
11
13
14
16
16
17
17
18
18
1
symbol concern critical points which must be
Translation of the original Operating Instructions