Product Specifications; Rules For Safe Operation - Makita GB602 Betriebsanleitung

ENGLISH
Model
Wheels:
Diameter
Width
Arbor Hole
No load speed
-1
(min )
Power Input
Overall length
Net Weight
............... Look for this symbol to point out important safety precautions.
It means attention!!
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
............. Read instruction manual.
Safe operation of this power tool requires you read and
understand this operator's manual and all labels affixed to
the tool. Safety is a combination of common sense,
staying alert, and knowing how your bench grinder works.
READ ALL INSTRUCTIONS
■ KNOW YOUR POWER TOOL. Read the operator's
manual carefully. Learn the applications and limitations
as well as specific potential hazards related to this tool.
■ GUARD AGAINST ELECTRICAL SHOCK by
preventing body contact with grounded surfaces. For
example: pipes, radiators, and refrigerator enclosures.
■ KEEP GUARDS IN PLACE and in working order.
Never operate the tool with any guard removed. Make
sure all guards are operating properly before each use.
■ REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see keys and adjusting
wrenches are removed from tool before turning it on.
■ KEEP THE WORK AREA CLEAN. Cluttered work
areas and workbenches invite accidents.
■ AVOID DANGEROUS ENVIRONMENTS. Do not use
power tools near gasoline or other flammable liquids, in
damp or wet locations or expose them to rain. Keep
work area well lighted.
2

PRODUCT SPECIFICATIONS

GB602
6 in. (150 mm)
5/8 in. (16 mm)
1/2 in. (12.7 mm)
2,850 (50Hz)
3,450 (60Hz)
250W
375 mm
9.4 kg

RULES FOR SAFE OPERATION

GB602W
6 in. (150 mm) 6 in. (150 mm)
1/4 in. (6.4 mm) 5/8 in. (16 mm)
1/2 in. (12.7 mm) 1/2 in. (12.7 mm)
2,850 (50Hz)
3,450 (60Hz)
250W
375 mm
9.5 kg
............. Only for EU countries
■ KEEP CHILDREN AND VISITORS AWAY. All visitors
should wear safety glasses and be kept a safe distance
from work area.
■ MAKE WORKSHOP CHILD PROOF with padlocks,
master switches, or by removing starter keys.
■ DON'T FORCE THE TOOL. It will do the job better and
safer at the rate for which it was designed.
■ USE THE RIGHT TOOL. Do not force the tool or
attachment to do a job for which it was not designed.
■ USE THE PROPER EXTENSION CORD. Make sure
your extension cord is in good condition. When using
an extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized
cord will cause a drop in line voltage resulting in loss of
power and overheating. An extension lead with a cross
sectional area of at least 1.5 mm
an extension cord 8 meters or less in length.
■ INSPECT EXTENSION CORDS PERIODICALLY and
replace if damaged.
GB801
8 in. (205 mm)
3/4 in. (19 mm)
5/8 in. (15.88 mm)
2,850 (50Hz)
3,450 (60Hz)
550W
395 mm
20.5 kg
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive on
waste electrical and electronic equipment
and its implementation in accordance
with national law, electric equipment that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
2
is recommended for