Specifications - Makita GV5010 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Lock button
1-2. Switch trigger
2-1. Side grip
3-1. Hex wrench

SPECIFICATIONS

Abrasive disc diameter
Rated speed (n) / No load speed (n
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
3-2. Clamp screw
3-3. Countersunk washer
3-4. Abrasive disc
3-5. Plastic pad
Model
)
0
Overall length
Net weight
Safety class
) : 83 dB (A)
pA
) : 94 dB (A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h,DS
2
GV5010
125 mm
ENE052-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
ENF002-2
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG905-1
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Disc Sander
Model No./ Type: GV5010, GV6010
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
ENG900-1
standard or standardized documents:
sum)
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENG901-1
000331
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
3
3-6. Spindle
4-1. Hex wrench
4-2. Abrasive disc
GV6010
150 mm
-1
4,500 min
181 mm
1.2 kg
/II
1.2.2016
Yasushi Fukaya
Director
ENH101-18