Makita GB602 Betriebsanleitung Seite 4

■ ALWAYS EASE THE WORKPIECE AGAINST THE
ABRASIVE WHEEL. When starting to grind. A harsh
impact can break the wheel. Use light pressure when
starting to grind; too much pressure on a cold wheel
can cause the wheel to crack.
■ RISK OF INJURY DUE TO ACCIDENTAL STARTING.
Do not use in an area where children may be present.
■ NEVER START THE GRINDER when the wheel is in
contact with the workpiece.
■ SECURE WORK. Always hold workpiece firmly against
the work rest.
■ DO NOT USE THE BENCH GRINDER if the flange nut
or clamp nut is missing or if the spindle shaft is bent.
■ FREQUENTLY clean grinding dust from beneath
grinder.
■ DO NOT OPERATE THIS TOOL WHILE UNDER THE
INFLUENCE OF DRUGS, ALCOHOL, OR ANY
MEDICATION.
■ ALWAYS STAY ALERT. Do not allow familiarity
(gained from frequent use of grinder) to cause
complacency.
■ A careless fraction of a second is sufficient to inflict
severe injury.
■ STAY ALERT AND EXERCISE CONTROL. Watch
what you are doing and use common sense. Do not
operate tool when you are tired. Do not rush.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warning does not by
themselves eliminate any danger. The instructions or warning they give are not substitutes for proper accident
prevention measures.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
Indicates danger, warning, or caution. May be used in conjunction with other symbols or
pictographs.
DANGER:
Failure to obey a safety warning will result in serious injury to yourself to other. Always follow the
safety precautions to reduce the risk fire, electric shock and personal injury.
WARNING:
Failure to obey a safety warning may result in property damage or personal injury to yourself or to
others. Always follow the safety precautions to reduce the risk of file, electric shock and personal
injury.
CAUTION: Failure to obey a safety warning may result in property damage or personal injury to
yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock
and personal injury.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.
WARNING:
Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules,
etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal
injury. Save this operator's manual and review frequently for continuing safe operation and instructing others who may
use this tool.
4
■ SAVE THESE INSTRUCTIONS. Refer to them
frequently and use them to instruct other users. If you
loan someone this tool, loan them these instructions
also.
WARNING:
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals
are:
- lead from lead-based paints.
- crystalline silica from bricks and cement and other
masonry products, and
- arsenic and chromium from chemically treated timber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic
particles.
DO NOT EXPOSE
TO RAIN OR USE IN
DAMP LOCATIONS