Device Description; Initial Use - Beurer TL 100 Gebrauchsanweisung

• You cannot repair the device. The device contains no parts that you can repair.
• Do not make any changes to the device without the manufacturer's permission.
• If the device has been changed, thorough tests and checks must be carried out to ensure the continued
safety of further use of the device.
General notes
Important
• Always consult a doctor before using the brightlight if you are taking medication such as pain relief medi-
cation, medication to reduce high blood pressure or antidepressant medication.
• Diabetics and people who suffer from retinal diseases must be examined by an optician before using the
brightlight.
• Please do not use the brightlight if you suffer from an eye disease such as cataracts, glaucoma, diseases
of the optic nerve or inflammation of the vitreous body.
• If you have health concerns of any kind, consult your GP!
• Remove all packaging material before using the device.
• Light sources are excluded from the guarantee.
Repairs
Important
• Do not open the device. Do not attempt to repair the device yourself. This can result in serious injury. Fail-
ure to comply will result in voiding of the warranty.
• For repairs, please contact Customer Services or an authorised retailer.

4. Device description

Overview
1. Fluorescent screen
2. Timer adjustment
3. Timer LED display
4. LED for Bluetooth ®
5. Brightness adjustment (dimmer)
6. On/off button
7. Mains part connection

5. Initial use

Take the device out of the plastic wrapping. Check the device for damage or faults. If you notice any damage or
faults on the device, do not use it and contact customer services or your supplier.
Positioning the device
Place the device on an even surface. The position should be chosen to ensure a distance of between 20 cm and
60 cm between the user and the device. The lamp is most effective at this distance. Ensure that there is a mains
socket close to the set-up area. Arrange the mains cable so that no-one will trip over it.
Power supply
Important
To prevent possible damage to the device, the brightlight must only be used with the mains part described here.
1. Insert the mains part into the connection provided for this purpose on the rear of the brightlight. The mains part
must only be connected to the mains voltage that is specified on the type plate.
2. After using the brightlight, unplug the mains part from the mains socket first and then disconnect it from the
brightlight.
App connection
You can control all of the device's functions with the "beurer LightUp" app on your smartphone.
To control the device's functions with the app on your smartphone, proceed as follows:
1. Ensure that your smartphone is connected to the Internet and that the brightlight is switched on.
1
2 3 4
11
6
5
7