Cleaning And Maintaining The Device; Storage; Disposal - Beurer TL 100 Gebrauchsanweisung

8. Cleaning and maintaining the device

The device should be cleaned from time to time.
Important
Ensure that no water gets inside the device.
The device must be switched off, disconnected from the mains and allowed to cool down each time be-
fore cleaning.
Do not clean the device in a dishwasher.
Use a slightly damp cloth to clean the device.
• Do not use any abrasive cleaning products and never submerge the device in water.
Do not touch the device with wet hands when it is plugged in and do not allow water to spray on the de-
vice. Only operate the device if it is completely dry.
We hereby guarantee that this product complies with the European R&TTE Directive 1999/5/EC. Please contact
the specified service address to obtain further information, such as the CE Declaration of Conformity.

9. Storage

If you are not going to use the device for an extended period of time, disconnect it and store it in a dry place, out
of the reach of children.
Follow the storage instructions provided in the "Technical data" chapter.

10. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful
life. Dispose of the device at a suitable local collection or recycling point. Dispose of the device in ac-
cordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any ques-
tions, please contact the local authorities responsible for waste disposal.
11. What if there are problems?
Important
Problem Possible cause
Device does On/off button switched off
not light up
No electricity
No electricity
LEDs have reached the end of their
service life.
LEDs faulty.
Solution
Switch on the on/off button.
Connect the mains part properly.
The mains part is faulty. Contact customer ser-
vices or your retailer.
For repairs, please contact Customer Services or
an authorised retailer.
14